The time you say to yourself, “I would like to do a landscape project using a landscape supply near me“, is also when you need to consider building a retaining wall. A landscaping project usually involves soil–loads of them. To support and maintain your landscape, you need to construct a retaining wall with the use of landscape materials.
What are Retaining Walls?
Retaining walls are supporting structures for holding back soil. The primary function of a retaining wall is to battle gravity. The design of the wall is to prevent downhill erosion, to add aesthetic to your lawn, and stabilise sloped yards. They also provide usable land, manage water runoff, and prevent debris from falling.
So, how do you build a retaining wall for your sloped yards?
Plan the Retaining Wall
Just like any basic landscaping project, you need to plan your retaining wall first. The design of your retaining wall will determine how you’re going to mark a freeform layout in your project area.
To do a freeform layout, you can use a rope or string to outline the shape. Then use a dig by using a shovel to mark the outline. You can also add in stakes or marking paints in the marked outline.
Prepare the Foundation
After you’ve marked the necessary areas, you can now begin digging a trench. Dig the trench for about 4 to 6 inches deep and with a width of 12 inches, or twice the width of the block you will be using for the wall.
Tamp down the dirt with a hand tamper and keep the ground level. After tamping it down, you can now fill the trench with about 3 inches of paver base. Afterwards, spread the base with a rake, and tamp it down again. By doing so, you are building a strong foundation. When it’s all levelled, you can now begin installing the blocks.
Build the Retaining Wall
For the first row of blocks of your wall, knock off the flanges with a hammer and chisel so the blocks will remain flat. Then set the first block in place at the beginning of its end with the lowest elevation, and check for level consistency side-to-side and front-to-back. Make sure that your blocks are all on the same level.
Fill with gravel directly behind the wall, then continue to build by adding more rows. After installing the next rows, you’ll need to add drainage directly behind the blocks by laying down landscape fabric behind the wall. Do this with the following levels of your blocks until you reach your desired level.
So, the next time you ask yourself, “What good landscape supply near me is perfect for my next landscape project?”, find some materials to build a retaining wall. We at Labrador Landscape can provide you with materials that you may need for your next landscape project. Visit us today at https://landscape-supply.com.au/.